Eurotech Vera Office Chair Adjustment Guide

Properly adjusting your office chair will not only help you sit more comfortably, but it will also help you sit ergonomically. Ergonomic office chairs are designed to help user’s reach higher productivity levels due to the customized support they offer. Every office chair is different, so sometimes it can be tricky to understand what each lever or knob does and how to properly adjust different parts. If you’re using your chair and it’s causing you discomfort, you may not be using it properly. Knowing how to sit in and adjust your chair can make a world of a difference in your sitting experience. In this blog, we’ll tell you how to adjust the seat height, seat depth, backrest, and armrests on the Eurotech Vera Office Chair.

Need help? Get our Free Office Chair Buying Guide!

Full Disclaimer: We are an office furniture dealer and sell some of the products we review. To learn more about the products we sell, our review process and why you can trust us, please visit: Why we’re different. Who is and The Learning Center?

Eurotech Vera Chair Adjustments

  1. Seat Height
  2. Seat Depth
  3. Multi-Position Tilt Angle
  4. Recline Tension
  5. Lumbar Height 
  6. Armrest Height, Width, and Pivot
  7. Final Thoughts

Watch Eurotech Vera Chair Adjustment Guide Video

The most common and well know office chair adjustment is the seat height. To adjust the seat height on the Vera, lift your weight off the chair and pull up on the right-side lever. To sit ergonomically, you’ll want to sit at a level where you can sit with your feet firmly planted on the ground and your knees bent at a 90-degree angle.

eurotech vera office chair height adjustments

The seat depth is the measurement from the back of the chair to the front of the seat edge. This adjustment determines how far back you sit in your chair. To make this adjustment, pull up on the left-side, top lever and slide the seat forward or backwards. The ideal ergonomic position will be at least a one-inch gap between your knees and the front edge of the seat.

The back-tilt angle can be adjusted on this chair by flipping down the left-side, lower lever to lock and up to unlock. There are four different tilt-lock positions you can choose from that range between upright and reclined. Each stop on the lever designates the recline position you sit.

Once your seat and backrest are fitted properly, you can adjust the recline tension to your liking. To adjust the recline tension in the backrest of your chair, turn the handle on the front right side of your seat. Turn it clockwise to tighten the recline and counterclockwise to loosen.

Eurotech Vera Backrest

The Vera does not have an adjustable lumbar support system, however it does have a curved mesh back that helps support your lower lumbar area.

This chair has height adjustable arms, with arm cap adjustments such as width, depth, and pivot. When adjusting the arm height, hold the buttons underneath the arm caps to raise or lower the armrests. You’ll want the height of your arm rests to be at a level where you can rest your arms at your side and bend your elbows at a 90-degree angle. To adjust the arm cap width, depth, and pivot, simply slide the arm pad to your desired location.

Now that you know how to properly adjust your Eurotech Vera Office chair, you should be able to sit as ergonomically correct as possible. You’ll find great benefits in overall comfort from sitting correctly in your chair. If you have any questions about office chair adjustments or how to properly sit in your chair, don’t hesitate to reach out.


Additional Office Chair Resources

Source link

We will be happy to hear your thoughts

Leave a reply

Enable registration in settings - general
Shopping cart